Tuesday, September 25, 2007

NIC Card Setting

Procedure to Operate the Huawei Mobile NIC :

Work at SSA :-

A. The Huawei NIC card may be programmed by the SSA before handing over to the subscriber. To programme the card the Programming Tool is supplied in CD.

B. Execution of Programming tool:-
1)The HostEN30 file is to be executed.
2)On the left scroll bar in SysConfig tool –
a. the serial port no to be assigned (which can be verified from device manager –serial port com where Huawei Mobile Connect is connected) &
b. speed as 230400.
3)In the Serv Mtce Tool on left scroll the following is to assigned:-
SPC Code-000000,
Channel-42 or 83,
SID-14496,
NID-SDCA Code(0376) &
MSIN-10-digit no.(3762911999) &
then WRITE.
C. The Computer is to be restarted .
D. If the programming is correct then signal will be displayed at the Huawei Mobile Connect Tool.
Subscriber activity:-
1. Subscriber is required to insert the NIC card at the designated slot on the laptop.
2. Install the Huawei Mobile Connect Tool software in the Laptop from the supplied CD (available in the NIC kit).
3. The Tool Huawei will be available at the desktop.
4. To access WLL services just click the Huawei icon.
5. The tool can be utilized to make/receive calls(ear-piece is supplied with kit), send/receive SMS & Net browsing.