Monday, October 1, 2007

Modem settings of WLL FWT's

*********************************************************************************************
Configuration of HUAWEI T1 ETS2288 set for Internet(PDSN):
**********************************************************************************************

FWT Set settings:
go to menu/settings/common/Data Services/Data Rate
from the help of up/down key set Data Rate as 2030400.
***********************************************************************************************
Modem Setup:
It requirs a USB to DB9 DATA cord and HUAWEI MODEM Driver CD.
User can install Huawei Wireless Modem by the following means.
1)Run Setup.exe in directory "Setup" to install the Modem's driver. System prompts users to insert USB data wire and install the Modem. We recommend users to adopt this method.
2)Open Control panel/phone and Modem option/Modems/add modem/(Click don't detect my modem; I will select it from a list.)/Have disk/(browse C://HUAWEI/MODEM/WIN2kXp/Select ".inf" and click Open and then OK) .Inf files needed on win98/Me:
Win98\HuaWeiMdm.inf HUAWEI WIRELESS MODEM(153.6K) .Inf files needed on Win2000/XP:
winXP\HuaWeiMdm.inf HUAWEI WIRELESS MODEM(153.6K)
**********************************************************************************************
How to access internet from PDSS server?
Connection Setup:
go to Control panel/Network and Dial-up connection/Make new connection/Dial-up to Private networkSelect Modem/Enter Phone number as #777/for all Users and then ok.
User name and Password is given by BSNL authorities.Dialing no is #777

**********************************************************************************************
Configuration of LG Model: LSP-340 E set for Internet(PDSN):
**********************************************************************************************
FWT Set settings:
Go to MENU/2.ADDITIONAL/4.SIO Baud Rate
And Set DATA BAUDRATE AS 19,200
**********************************************************************************************
Modem Installation:
Go to Control panel/phone and Modem option/Modems/add modem/(Click don't detect my modem; I will select it from a list.)/ (Standard Modem Types)/Standard 19200 bps Modem/select port then finish modem installation.
Important Note: from Control panel/phone and Modem option/Modems, select Standard 19200 bps Modem and go to properties , in advanced Tab put "at+crm=1".

**********************************************************************************************
How to access internet from PDSS server?
Connection Setup:
go to Control panel/Network and Dial-up connection/Make new connection/Dial-up to Private networkSelect Modem/Enter Phone number as #777/for all Users and then ok.
User name and Password is given by BSNL authorities.Dialing no is #777

**********************************************************************************************
Configuration of LG Model: LST-260 B set for Internet(PDSN):
**********************************************************************************************
FWT Set settings:
Dial ##7#3* -to Enable Modem
Dial ##7#4* -to Disable Modem
**********************************************************************************************
Unibus Driver Kit Installation or Modem Installation:
Windows98/ME:
Normal Installation
*********************************************************************************************
1. Double-Click "LGUSBModemDriver_Eng_AIS_Ver_4.7.exe" to install the new version of the drivers. 2. Recommended not to plug in the device untill the drivers kit is installed. 3. Close all the applications if required, reboot the system.
Windows2K/XP:
1. Double-click "LGUSBModemDriver_Eng_AIS_Ver_4.7.exe" to install the new version of the drivers. 2. Recommended not to plug in the device untill the drivers kit is installed.
Important Note: from Control panel/phone and Modem option/Modems, select LGE CDMA USB Modem and go to properties, in advanced Tab put "at+crm=1".

**********************************************************************************************

How to access internet from PDSS server?
Connection Setup:
go to Control panel/Network and Dial-up connection/Make new connection/Dial-up to Private networkSelect Modem/Enter Phone number as #777/for all Users and then ok.
User name and Password is given by BSNL authorities.Dialing no is #777

*********************************************************************************************

Configuration of Airtone 800 set for Internet(PDSN):

*********************************************************************************************

1. Without connecting the instrument to PC , Install the USB Driver - Run the PL-2303

Driver Installer.exe file .

2. Connect the instrument to PC using Data Cable (Instrument end – 9-Pin D-type Connector

& PC end – USB Port).

3. Now Install the Modem Driver using Modem Driver_003.exe file. After successful

installation,CBP4Faxmdmdrv.inf file will be installed.

4. Modem settings in PC –

Settings - Control Pannel – Phone & Modem options – Modems – Select Modem (VIA

CBP4.0 modem) - Properties –

General – Max.Port Speed = 115200 .

Advanced - at+crm=1;+cmux=1;+cps=33;+cta=0.

5. Setting / Programming in IFWT (instrument) –

Settings – 4 – 1X Data fax – 1 – Data in always mode.

Port Speed – 2 – 115200.

6. Detecting Modem / Query Modem Procedure -

Settings - Control Pannel – Phone & Modem options – Modems – Select Modem (VIA

CBP4.0 modem) - Properties – Diagnostics – Query Modem.

7. If modem is detected successfully (Response to All parameters should be OK after Query

Modem) , then create dial-up connection as follows -

For Windows 2000 –

Settings - Control Pannel – Network & Dial-up Connections – Make New Connection –

Dial-up to the Private Network – Phone Number = > #777 ( Disable ‘Use Dialling rules’)
- For all users – Name of Dial-up Connection

–User name and Password is given by BSNL authorities

**********************************************************************************************
Configuration of HTP-800A-Hantel set for Internet(PDSN):
**********************************************************************************************

1. Without connecting the instrument to PC , Install the USB Driver - Run the setup.exe

file. TELSON Folder will be installed

2. Connect the instrument to PC using Data Cable (Instrument end – Data Connector

& PC end – USB Port).

3. Modem settings in PC –

Settings - Control Pannel – Phone & Modem options – Modems – Select Modem (TELSON

Handset)- Properties –

General – Max.Port Speed = 115200 .

Advanced - at+crm=1.

5. Setting / Programming in IFWT (instrument) –

Press MENU – 0 – 4 – 1 – Select 2.Data – Select USB CDC – Press Store

Press MENU – 0 – 4 – 2 – DS BAUD – 115200 – Press Store

6. Detecting Modem / Query Modem Procedure -

Settings - Control Pannel – Phone & Modem options – Modems – Select Modem (VIA

CBP4.0 modem) - Properties – Diagnostics – Query Modem.

7. If modem is detected successfully (Response to All parameters should be OK after Query

Modem) , then create dial-up connection as follows -

For Windows 2000 –

Settings - Control Pannel – Network & Dial-up Connections – Make New Connection –

Dial-up to the Private Network – Phone Number = > #777 ( Disable ‘Use Dialling rules’)

- For all users – Name of Dial-up Connection –

–User name and Password is given by BSNL authorities

**********************************************************************************************
Configuration of ZTE set for Internet(PDSN):
**********************************************************************************************

1. Connect the instrument to PC using Data Cable (Instrument end – 9-Pin D-type Connector

& PC end – 9-Pin D-type Connector).

2. Modem settings in PC –

Settings - Control Pannel – Phone & Modem options – Modems – Select Modem (Standard

33600 bps modem) - Properties –

General – Max.Port Speed = 115200 .

Advanced - at+fclass=0;at+crm=2;at$qcmdr=3.

4. Setting / Programming in IFWT (instrument) –

Enable DATA Mode in IFWT.

5. Detecting Modem / Query Modem Procedure -

Settings - Control Pannel – Phone & Modem options – Modems – Select Modem (LGE

CDMA USB Modem) - Properties – Diagnostics – Query Modem.

6. If modem is detected successfully (Response to All parameters should be OK after Query

Modem) , then create dial-up connection as follows -

For Windows 2000 –

Settings - Control Pannel – Network & Dial-up Connections – Make New Connection –

Dial-up to the Private Network – Phone Number = > #777 ( Disable ‘Use Dialling rules’)

- For all users – Name of Dial-up Connection –

–User name and Password is given by BSNL authorities